服務熱線
400-617-8668
CMW配件
簡要描述;簡介
帶有R＆S®CMW-Z11的R＆S®CMW-Z10具有出色的屏蔽效果和的耦合特性，R＆S®CMW-Z10可用于高達6 GHz的頻率。 這些出色的功能與模塊化選項概念相結合，使得RF屏蔽盒對于任何無線電通信測試儀都是*的。
射頻屏蔽盒由堅固的鋁制成。 它通過一個具有限定擋塊的杠桿手柄牢固地關閉。 這確保了圍繞整個箱體提供的密封線的均勻壓縮。 蓋子內襯吸收材料，可zui大限度地減少反射。
天線耦合器板上的天線結構經過優化，可實現出色的無線連接。 高度寬帶螺旋天線可用于各種應用。
CMW配件
關鍵事實
頻率范圍高達6 GHz
出色的屏蔽特性（<80 dB）
寬帶螺旋天線允許多種應用
優化的天線結構可實現的RF耦合
人體工程學關閉機制
足夠的平板電腦空間
特點與優勢
寬頻率范圍高達6 GHz
帶R＆S®CMW-Z11的R＆S®CMW-Z10適用于高達6 GHz的應用，因此涵蓋了GSM，UMTS，LTE，CDMA2000®，WLAN，Bluetooth®和GPS等所有常見無線標準。它提供了高屏蔽效能，使外部干擾的影響降至zui低。
超低的反射
RF屏蔽盒的蓋子襯有吸收材料以減少反射。作為DUT位置的函數，強反射會引起衰減的顯著變化。
模塊化選項概念和靈活的模塊分配
帶R＆S®CMW-Z11的R＆S®CMW-Z10具有四個用于不同可選模塊的模塊插槽。可用的選件目前包括25針D-Sub饋通（R＆S®CMW-Z12），USB 2.0饋通（R＆S®CMW-Z13），雙N連接器（R＆S®CMW-Z14）和15針D- Sub饋通（R＆S®CMW-Z15）用于雙向音頻測試。也可以插入客戶特定的模塊。
足夠的空間可以實現定位，即使對于諸如平板電腦等大型DUT也是如此
即使是大型DUT，例如平板電腦，也可以適應。 RF屏蔽盒為定位DUT提供了充足的空間，可以zui大限度地減少DUT和測試儀之間的耦合衰減。
專為苛刻的，持續的工作和人體工程學操作而設計
射頻屏蔽盒設計可承受服務和制造環境中遇到的惡劣條件。關閉機構經過優化，符合人體工程學使用，確保防疲勞操作，同時提供高質量的結果。
天線分集和MIMO測試
R＆S®CMW-Z16第二個天線選件是圓極化的第二個天線元件，可以測試發射分集天線和多輸入多輸出（MIMO）系統。
R＆S®CMW-Z16安裝在射頻屏蔽盒的背面，可實現MIMO DUT（如LTE MIMO 2x2）的輻射耦合。標準天線向第二個天線元件（R＆S®CMW-Z16）提供90°方向的耦合場。這提供了近場環境中MIMO設備的耦合。
雙向音頻測試
R＆S®CMW-Z15音頻測量選件提供R＆S®CMW-Z10中雙向音頻測量所需的附件。音頻測量所需的麥克風和揚聲器可以地定位在RF屏蔽盒內。音頻信號通過屏蔽D-Sub饋通傳輸，以zui大限度地減少外部干擾對屏蔽盒特性的影響。音頻信號通過RF接口傳輸?shù)綗o線電通信測試儀的音頻編碼/解碼器。音頻路徑可以通過比較原始信號和恢復的信號來測量。
Specifications
| R&S®CMW-Z10 RF shield box with R&S®CMW-Z11 antenna coupler | ||
| Shielding effectivness | ||
| Including R&S®CMW-Z11, R&S®CMW-Z12 and R&S®CMW-Z14 | 0.4 GHz to 4 GHz | > 80 dB |
| 4 GHz to 6 GHz | > 60 dB | |
| With R&S®CMW-Z13 mounted | 0.4 GHz to 4 GHz | > 60 dB |
| 4 GHz to 6 GHz | > 55 dB | |
| Outer dimensions | W × H × D | 320.9 mm × 267.5 mm × 527.7 mm (12.6 in × 10.5 in × 20.8 in) |
| Weight | 9 kg (19.8 lb) | |
| R&S®CMW-Z11 antenna coupler | ||
| VSWR | VSWR without DUT, with R&S®CMW-Z110, R&S®CMW-Z10 open | |
| 0.4 GHz to 1.4 GHz | < 3.5 | |
| 1.4 GHz to 3.5 GHz | < 2 | |
| 3.5 GHz to 6 GHz | < 3.5 | |
| Max. power ratings | from DUT | +37 dBm |
| from R&S®CMW | +33 dBm | |
| Polarization | circular | |
| Connector | N female | |
| R&S®CMW-Z12 Var02 D-Sub feedthrough | ||
| Power pins 14 to 18 | max. current rating, per pin | 1 A |
| max. rated voltage | 15 V | |
| cut-off frequency | 1 kHz | |
| Data pins 1 to 13 and 19 to 25 | max. current rating | 50 mA |
| max. rated voltage | 15 V | |
| max. pass frequency | 5 MHz | |
| filter shunt capacitance | < 800 pF | |
| R&S®CMW-Z12 Var04 D-Sub feedthrough, extended DC power pin connectors | ||
| Power pins 12 to 18, 24, 25 | max. current rating, per pin | 1 A |
| max. rated voltage | 15 V | |
| cut-off frequency | 1 kHz | |
| Data pins 1 to 11 and 19 to 23 | max. current rating | 50 mA |
| max. rated voltage | 15 V | |
| max. pass frequency | 5 MHz | |
| filter shunt capacitance | < 800 pF | |
| R&S®CMW-Z13 USB 2.0 feedthrough | ||
| Connector inside antenna coupler | USB-A | |
| Connector outside antenna coupler | USB-B | |
| Power supply | max. current rating | 0.5 A |
| rated voltage | 5 V | |
| Data rate | low speed | |
| full speed | ||
| USB 2.0 high speed | ||
| R&S®CMW-Z14 RF feedthrough | ||
| Connector inside antenna coupler | 2 × N female | |
| Connector outside antenna coupler | 2 × N female | |
| Impedance | 50 Ω | |
| Frequency range | 0 Hz to 6 GHz | |
| R&S®CMW-Z15 audio measurement option | ||
| Supply pin 1, ground pin 2 | rated voltage | 5 V |
| supply current | < 10 mA | |
| Microphone output pin 11, microphone ground pin 3 | recommended operating frequency | 1 kHz |
| operating frequency range | 300 Hz to 10 kHz | |
| max. rated output voltage | 1 V (pp) | |
| gain settings (switches inside) | +10 dB (default), 20 dB and 0 dB | |
| Speaker input pin 5, speaker ground pin 15 | operating frequency range | 300 Hz to 5 kHz |
| max. rated input voltage | 20 V (pp) | |
| nominal input impedance | 600 Ω | |
| R&S®CMW-Z16 second antenna element for diversity/MIMO measurements (R&S®CMW-Z14 required) | ||
| VSWR | VSWR without DUT, with R&S®CMW-Z110, R&S®CMW-Z10 open | |
| 0.45 GHz to 1.4 GHz | < 3.5 | |
| 1.4 GHz to 3.5 GHz | < 2.3 | |
| 3.5 GHz to 6 GHz | < 3.5 | |
| Max. power rating | from DUT | +37 dBm |
| from R&S®CMW | +33 dBm | |
| Polarization | circular | |
| Connector | N female with N feedthrough | |
| R&S®CMW-Z17 barcode kit for video analysis (R&S®CMW-Z12 required) | ||
| Preconditions | with R&S®CMW-Z10/R&S®CMW-Z11 |
|
| standalone operation | requires R&S®CMWrun software option R&S®CMW-KT104 plus dedicated signaling extension for control and evaluation of video quality based on barcodes. | |
| Decode rate | 60 decodes per second | |
| Focal range | minimum distance between barcode scanner and DUT screen for a DUT screen width of | |
| 39 mm (1.5 in) | 50 mm (2.0 in) | |
| 114 mm (4.5 in) | 170 mm (6,7 in) | |
| Power supply | max. current rating | 800 mA |
| rated voltage | 5 V DC ± 5 % | |
| Dimensions (W × H × D)1) | horizontal DUT position | 255 mm × 166 mm × 285 mm(10.0 in × 6.5 in × 11.2 in) |
| vertical DUT position | 255 mm × 146 mm × 285 mm(10.0 in × 5.8 in × 11.2 in) | |
1)Height is reduced by 5 mm (0.2 in) when base plate is not used.